Cone Crusher Wear Parts
Mantle liners, concave and bowl liners, gyratory concaves and upper housing castings for cone crushers — cast in manganese and alloy grades, produced to your model reference, drawing or sample.
Find Your Part
Representative references below. If your model or part number is not listed, send it and we will match it.
Upper Housing
Produced to drawing, sample or part number.
Upper Housing
Produced to drawing, sample or part number.
Concave Liner
Produced to drawing, sample or part number.
Concave Liner
Produced to drawing, sample or part number.
Mantle Liner
Produced to drawing, sample or part number.
Mantle Liner
Produced to drawing, sample or part number.
Gyratory Concave
Produced to drawing, sample or part number.
Can't Find Your Part?
Send the drawing, sample or part number — we review it against our references and existing tooling.
Produced to Your Requirement
Beyond standard references, the same casting and review process supports custom projects.
Drawing-based requirements
Sample reference
Custom dimensions
Branding / marking
Casting & Manufacturing Review
Casting
Stage 1 of the production review path.
Heat Treatment
Stage 2 of the production review path.
Machining
Stage 3 of the production review path.
Inspection & Finishing
Stage 4 of the production review path.
Where This Category Is Used
Hard rock mining
Aggregate & quarrying
Cement & clinker
Recycling & demolition
Specifications We Confirm Before Production
Material, machining and inspection scope are agreed in review — so the part and the paperwork match your requirement.
| Material | High-manganese steel for mantles & concaves; alloy grades reviewed per chamber profile |
| Casting routes | Green sand / shell moulding / lost foam, matched to liner geometry |
| Machining | As-cast or machined surfaces to drawing, as agreed in review |
| Inspection | Material, dimensional, hardness and visual records per order; third-party on request |
| MOQ & lead time | Confirmed during technical review |
Specific values depend on the part reference, drawing and working conditions — send the requirement and we confirm them in the technical review.
How to Select the Right Part
What is the difference between mantle and concave?
Which grades do you cast for cone parts?
Can you match a specific chamber profile?
Explore More Castings
Other wear-part families produced by the same review and inspection process.
Jaw Crusher Wear Parts
Fixed and movable jaw plates, cheek plates and side liners for jaw crushers in mining and quarrying duty.
Explore →
Impact Crusher Wear Parts
Blow bars, impact plates and liners for impact crushers, cast in high-chromium, alloy and manganese grades.
Explore →
Hammer Crusher Wear Parts
Hammer heads and hammers for hammer crushers in mining, quarrying and cement duty, cast in manganese and alloy steel.
Explore →Request a Quote for Cone Crusher Wear Parts
Send the drawing, part number or equipment model and include quantity and delivery market if known. We reply with technical feedback within 12–24 hours.