Pattern preparation
The pattern and parting line are reviewed for the required geometry, draft, cores and machining allowance. The pattern surface is prepared for the resin-coated sand shell.
Casting process
Литьё в оболочковые формы для серийных деталей и лучшей поверхности
Маршрут с песчаной оболочкой на смоле для малых и средних деталей, где важны стабильность размеров, поверхность и серийность.
Process overview
How Литьё в оболочковые формы fits your project
Shell moulding forms a thin, rigid mould from resin-coated sand heated against a pattern. Compared with standard green sand moulding, the shell can provide a more stable mould surface and more repeatable results for suitable parts. It is considered when the buyer needs a balance between tooling cost, production volume, finish and dimensional control.
Process flow
From pattern to inspected casting
The exact controls, material grade and acceptance documents are confirmed against the part requirement.
Shell formation
Resin-coated sand is brought against the heated pattern and cured into a rigid shell of controlled thickness. The shell halves are checked before assembly.
Core, shell and mould assembly
Cores and shell sections are fitted, aligned and supported with backing material where required. The gating and riser arrangement is kept stable for repeat production.
Pouring and solidification
The agreed alloy is melted and poured into the assembled shell. Cooling time and handling are managed according to the part geometry and material.
Cleaning and inspection
The shell is removed after solidification, followed by cutting, fettling, heat treatment, machining and inspection according to the confirmed order scope.
Why consider this route
What this route can offer
- More consistent mould surfaces and dimensions for repeatable production.
- Improved surface finish compared with a basic sand mould for suitable geometries.
- Useful balance between precision, tooling investment and series volume.
- Can reduce finishing and machining effort when allowances are designed correctly.
Suitable applications
Typical fit
- Small and medium castings supplied in repeat series
- Components where dimensional consistency matters across batches
- Housings, covers, brackets and industrial parts with defined geometry
- Projects needing a more controlled mould surface without moving to precision casting
After casting
What happens after casting
After shell casting, the agreed route may include shakeout, cutting, fettling, heat treatment, machining and dimensional inspection. Sample approval or first-article review can be used when the part is new or the geometry is critical.
Process FAQ
Questions buyers usually ask
When is shell moulding better than green sand casting?
Shell moulding is considered when repeatability and surface finish are more important than the lowest tooling cost. Part size, geometry, volume and machining allowance still determine whether it is economical.
Is shell moulding suitable for wear parts?
It can be suitable for selected small and medium wear or industrial components. The material, impact duty, section thickness and final inspection requirements must be reviewed for each part.
Can shell moulding reduce machining?
A controlled mould surface and stable allowances can reduce finishing or machining effort on suitable features, but the actual allowance is confirmed from the drawing and tolerance requirement.